Configuring Eudora

NOTE: If you are having trouble checking Email using Eudora, check to make sure that your settings for checking Email are configured to Never start TLS, or that the SMTP and POP/IMAP server name matches the name on the SSL certificate you are using exactly. Eudora has zero tollerance for domain mis-matches in its SSL certificate checking.

These directions apply specifically to Eudora 5.2.

From the Tools pull-down menu, select Options.
In the Getting Started section, provide the following information:
- Real name
  
  This should be your own full name.
- Return Address
  
  This should be your complete e-mail address, for example bob@yourcompany.com.
- Mail Server (Incoming)
  
  This is your domain name, for example yourcompany.com
- Login Name
  
  This should be your e-mail user name, for example bob for an e-mail address of bob@yourcompany.com.
- SMTP Server (Outgoing)
  
  This is your domain name again.
- Allow Authentication
  
  Select this checkbox. This will make Eudroa authenticate before sending mail, which is necessary for the SMTP-Auth anti relay system on your Virtual Private Server
For POP and IMAP accounts, perform the following steps:
- Click Checking Mail
- Change the Secure Sockets when Receiving section from the default: If Available, STARTTLS to Never.
- Click OK.
- Restart Eudora.

Configuring Eudora

Real name

Return Address

Mail Server (Incoming)

Login Name

SMTP Server (Outgoing)

Allow Authentication